STUDIO CAP/ POCKET COMBO PRESS
The Studio Cap/ Pocket Combo Press is designed for the application of transfers to all types of headwear and small garments. The Studio Cap/ Pocket Combo Press combines a separate cap and two pocket heads that can each be interchanged in a matter of seconds, via two thumb screws, with electrical connections on a plug-in lead. This design innovation offers great versatility.
In addition, operators benefit from a Digital Controller for the accurate pre-selection of both time and temperature, user adjustable base platen to suit different styles of cap and garment, countdown digital timer to buzzer, illuminated on/ off switch, wide opening angle for ease of placement of hats/ garment and fingertip pressure control.
It’s lightweight, portable, simple to operate and requires minimum operating space, so is ideal for environments with limited working space, such as under a retail counter, at a trade show or event.
Compliance: Manufactured and tested to comply with EC safety regulations. CE labelled.
- 1 x Cap male mould: 15 cm x 8 cm (6 in x 3.14 in)
- 1 x Pocket table (Large): 15 cm x 9 cm (6 in x 3.6 in)
- Optional: 1 x Pocket table (small): 9 cm x 6.5 cm (3.5 in x 2.55 in)
- 12 months warranty on machine and element.
- Instruction manual including full operating and safety instructions, electrical wiring diagrams, exploded diagram and parts list.
- Service and spare part support.
Ideal for use with flex, flock, laser and sublimation transfers.
Interchangeable Heating Elements
Featured separate cap and two pocket heads that can each be interchanged in a matter of seconds, via two thumb screws.
The Studio Cap/ Pocket Combo press features a Digital Controller for time and temperature accuracy, taking all of the sweat out of getting the correct settings time-after-time. The controller is easy and intuitive to operate, with full instructions included in the supplied Operators Handbook.
Lightweight and Portable
Lightweight, portable, simple to operate and requires minimum operating space.
|Working Area (W x H x D):||32 x 63 x 56 cm|
|Weight:||Gross 16.5 Kg / Net 13.62 Kg|
|Power Requirements:||230-240 Volts AC / 3 Amp Fuse / 400 Watts|
|Heat Element:||3 x Continuous - Cast In Aluminium - 2 x Pocket Elements / 1 x Cap Element|
|Table Size (L x W):||Male: 15 cm x 8 cm, Pocket Table: 15 cm x 9 cm, Small Pocket Table: 8 cm x 6.5 cm|
|Frame Material:||Cast Aluminium|
|Control Unit:||LED Digital Microprocessor Control|
|Working Temperature:||0 - 260°C|
|Display Timer Range:||0 - 9999 sec|
|Warranty:||12 months (machine & heat element)|