PRODUCT INFORMATION

OMEGA SERIES 500 PRESS

The Omega Series 500 Press is a pneumatically operated, double table heat press ideally suited to medium volume production environments. The double table feature enables operators to prepare the next item to be pressed, whilst the first table is being pressed.

Benefits of the pneumatic operation are that exact, repeatable pressure is achievable on every press cycle and operator fatigue is kept to a minimum, resulting in improved operator output and reduced mistakes due to fatigue.

Safety is paramount, so the Omega Series 500 Press features several excellent safety features including:

- Twin button control system ensures the operators hands are clear of the pressing area.
- Emergency stop button that shuts down machine operation.
- Heat plate will not operate until directly aligned over the lower table.
- Inbuilt thermal cut out on the heating element shuts off power to heating element should the temperature exceed 235°C +/- 15°C (455°F +/-27°F).

Pressure is user controlled via a simple, fully adjustable air pressure gauge and locking air pressure control. Fully adjustable time and temperature are set via the controller, with error message display in the event of a fault.

Minimal operating space is required for the machine.

Compliance: Manufactured and tested to comply with EC safety regulations. CE labelled.

Supplied with:

- 12 months warranty (machine and heating element)
- Instruction manual including full operating and safety instructions, electrical wiring diagrams, exploded diagram and parts list.
- Service and spare part support.

Ideal for use with flex, flock, laser, sublimation, Bonding, Laminating, Reactivation and DTG.

Optional Base Table:

TABOMEGA ~ 15.3 cm x 15.3 cm base table.

Requires:

- Compressed air supply max: 6 bar. (Not Included).
- A high efficiency silent air compressor can be supplied upon request.

FEATURES

Two Button Safety Operation

Operator safety is vital in any production environment and the Omega Series 500 Press requires the operator to simultaneously press two buttons to commence the cycle operation. This ensures the operator’s hands are kept clear from the pressing area.

Twin Table Operation

The operator can load one table, while the other is in the closed transfer position, improving operator efficiency and increasing production levels.

Pneumatic Operation

The Omega Series 500 Press is pneumatically operated, which allows it to achieve a maximum of 6-bar pressure. This makes it ideal for all forms of pressing work even in the most demanding high pressure environments. The pneumatic operation drastically reduces operator fatigue.

SPECIFICATIONS

Working Area (W x H x D): 92 x 52 x 61 cm
Weight: Gross 71 Kg / Net 45 Kg
Power Requirements: 230 - 240 Volts AC / 13 Amps / 1.5 kW
Fuse: (x2) 15 Amps
Heat Element: Continuous - Cast In Aluminium
Table Size (L x W): 21 cm x 34 cm
Maximum compressed air supply: 6 bar. max. (87 psi. max)
Suggested compressed air supply: 3.5 - 6 bar. max. (2 cu.ft/min at 50-87 psi)
Compressed air consumption: 60 litres/min
Recommended compressor tank capacity: 50 litres
Frame Material: Steel
Control Unit: LED Digital Microprocessor Control
Working Temperature: 70 - 225°C
Display Timer Range: 0 - 999 sec
Warranty: 12 months (machine and heating element)

GALLERY

APPLICATIONS

Ceramic

Digital Interiors

Drinkware

Flags & Banners

Flooring

Footwear

Gaming Tables

Garments

Laundry

Merchandise

Personalisation

Promotional

Ribbons, Laces & Lanyards

Signage - Hard

Signage - Soft

Sportswear

Textile

Workwear

DOCUMENTATION

Product Data Sheet

Product specifications and detailed information.

Operators Handbook

Detailed instruction on how to operate the press.

Spares

Find a part or replacement part for your machine.

WHERE TO BUY

Find a local A Adkins retailer or distributor near you.