PRODUCT INFORMATION

BETA MAXI HI-LIFT SWING PRESS

Looking for that little bit extra, then look no further than the Beta Maxi Hi-Lift!

Built to the same high specification as our market leading Beta Maxi press, which has led the way for over 25 years.

The machine is adapted for thicker items with the inclusion of a longer rear head post, that lifts the heat plate by approx. 2.5 cm (1 in) providing an additional 25mm clearance between the heat plate and base plate, which makes it possible to press onto thicker substrates.

Safety remains paramount and the inbuilt thermal cut out on the heating element shuts off power to heating element should the temperature exceed 235°C +/- 15°C (455°F +/-27°F).

Compliance: Manufactured and tested to comply with EC safety regulations. CE labelled.

Supplied with:

- 12 months (machine) / Lifetime (heat element)
- Instruction manual including full operating and safety instructions, electrical wiring diagrams, exploded diagram and parts list.
- Service and spare part support.

Ideal for use with flex, flock, laser, sublimation, Bonding, Laminating, Reactivation and DTG.

Optional Base Tables:

15.3cm x 15.3cm (6” x 6”) – Part No. TABMAX15.3
20.5cm x 20.5cm (8” x 8”) – Part No. TABMAX20.5
25.4cm x 25.4cm (10” x 10”) – Part No. TABMAX25.4
30.5cm x 30.5cm (12” x 12”) – Part No. TABMAX30.5
38.0cm x 38.0cm (15" x 15") – Part No. TABMAX38
38.0cm x 50.0cm (15" x 20") – Part No. TABMAX50
30.5cm x 15.3cm (12" x 6") – Part No. TABMAXOBL
38.0cm x 21.0cm (15" x 8") – Part No. TABMAXUMB

FEATURES

SAFETY RELEASE

Operator safety is vital in any production environment and the Beta Maxi range features a self-locking safety catch. The catch safely secures the press in the open position when not in use, and when in the closed position secures the heat plate closed ensuring operator safety even under high pressure operation.

Hi-Lift Clearance

The extended rear post results in an additional 25mm clearance between the heat plate and press bed. This allows the operator to print onto thicker substrates such as award plaques and acrylic blocks.

SWING AWAY OPERATION

The swing head operation of the Beta Maxi range exposes the entire lower platen. This the advantage of moving the heated top plate completely away from the garment loading area, therefore minimising risk to the operator. This also makes the Maxi one of the easiest heat presses to accurately position your garment and transfer.

SPECIFICATIONS

Working Area (W x H x D): 92 x 64 x 110cm
Weight: Gross 52kg / Net 45kg
Power Requirements: 230 - 240 volts AC / 13 Amp / 2500 watts
Heat Element: Continuous - Cast In Aluminium
Bed Size (L x W): 38 x 50cm
Frame Material: LM6 Cast Aluminium
Control Unit: LED Digital Microprocessor Control
Working Temperature: 70 - 235 °C
Display Timer Range: 0 - 9.59 min
Warranty: 12 months (machine) / Lifetime (heat element)

GALLERY

APPLICATIONS

Ceramic

Digital Interiors

Drinkware

Flags & Banners

Flooring

Footwear

Gaming Tables

Garments

Laundry

Merchandise

Personalisation

Promotional

Ribbons, Laces & Lanyards

Signage - Hard

Signage - Soft

Sportswear

Textile

Workwear

DOCUMENTATION

Product Data Sheet

Product specifications and detailed information.

Operators Hand Book

Detailed instruction on how to operate the press.

Spares

Find a part or replacement part for your machine.

WHERE TO BUY

Find a local A Adkins retailer or distributor near you.